Workshop Misc

4oz(120ml)  Tap magic with EP-Xtra   Ozone friendly  GREAT FOR LATHE TOOLS DRILLS &TAPS   LPR TOOLMAKERS RECOMMENDS USING TAP MAGIC FOR YOUR WORK   Cutting Fluid: SUITED FOR  ALUMINUM, STAINLESS...

TAPPING CENTRE - KNURLED BODY Spring loaded   1/2" shank with spring loaded centre. Ground and hardened. Ideal for tapping on drill press, lathe or mill      

TAPPING PIPE SPANNERS (30-70mm)  SUITED FOR LARGE TAPS - Pipe Threads   Made from high-quality steel - with high forging hardness, reliable quality, excellent anti-rust performance. Designed to be used on recommended large BSP - BSPT - NPT...

 7pc TCT Armour Piercing Metric Drill Set (Multi Purpose)  Includes a 120ml can of tap magic fluid & a 210mm diamond file to suit. Sizes included: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm & 12mm (7 Pieces) Drill Sizes: 3mm x 70mm 4mm x...

LPR TOOLMAKERS RANGE OF THREAD RESTORING FILES These files are the highest quality with cross-cut and depth proportional to the thread pitch, so file will not skip or jump out of fine pitches. Also these Thread files are milled rather than cold-formed...

4 x TOOLMAKERS PARALLEL CLAMP 2-1/2"   Jaw Opening: 1-1/2" *38mm       Jaw Length:   2.1/2"       Width: 64mm       Height: 22mm     HARDENDED AND TEMPERED JAWS...

TOOLMAKERS PARALLEL CLAMPS 2" - 8" Range   HARDENDED AND TEMPERED JAWS. CLAMPS EQUIPPED WITH SPRING SCREW CLIPS. HIGHLY USEFUL TOOL FOR CLAMPING SMALL WORK FOR DRILLING. BLACKENED FINISH. BUY SINGULARLY OR IN OUR SAVER...

TWEEZER SET STAINLESS STEEL 6pc SET IN POUCH 6 Different Tweezers. Very Popular with Hobby Projects, Circuit Probing, Wax Carving, Jewellers and Model Makers. Comes supplied in Plastic Pouch    

  Universal Transfer Center Punch & Aligner 4-26mm 3/16" to  1.1/32" Spring loaded Centre   * Perfect centre hole alignment for all hole sizes within the range of the punch. * The spring loaded knurled body is pushed down until...

V Type Angle Plate (Slotted)   CAST IRON Overall Length – 7” (175 mm)   Height – 5” (125 mm)   Width – 5” (125 mm) - The Clamping slots make it easy for mounting onto work spaces for machining,...

  V Type Angle Plate (Slotted)   CAST IRON Overall Length – 8” (200 mm)   Height – 6” (150 mm)   Width – 6” (150 mm)   MOUNT HOLES - 1/2" WIDTH X 1.5/8" LENGTH - The Clamping slots...

5 PC VALVE SEAT CUTTER SET  Restorers tool for vintage cars, bikes and old engines Not suited for modern engines that have hardened seats. THIS SET IS MADE FROM CARBON STEEL, Only to be used on Cast Iron or Alloy Seats; they will not cut...