NEW ARRIVALS

CAST IRON VEE BLOCKS (PAIR) 3" Vee Blocks [Matching Pair] - 75 x 56 x 31mm - Up to 70mm Round Supplied in matching ground pairs. Made from high quality cast iron. Properly seasoned against distortion and stress relieved. Accurately machined - square...

32pc Boxed Tap & Hex Die Set - 1/4" to 3/4" 24TPI (Carbon Steel) suit Harley & Indian Motorcycles     BOXED SET - includes standard Round split Button Dies   all Taps & Dies are made from Carbon...

32pc Boxed Tap & Round Die Set - 1/4" to 3/4" 24TPI (Carbon Steel) suit Harley & Indian Motorcycles     BOXED SET - includes standard Round split Button Dies   all Taps & Dies are made from Carbon...

5/8" x 27TPI UN Thread Buy a tap or die individually or add the die in the combo option above.    APRICA BRAND - Super Hard to get - Made from Quality HSS   ISO STANDARD    Tap - Inter Thread (Middle Tap)   Button...

   5MT - HARDENED AND GROUND PRECISION TEST BAR (Please note our 5MT comes in sleeve & not a wooden box) 330mm Total length   (Test Piece is 180mm in length) x 43.5mm parallel shaft within .0002"  Re - align your tail stock...

6pc Guided Tap Spindle Set [1/16" to 5/8"] New design for 2024   3 Holders: Will suit the following tap sizes 1/16" to 1/4" (1.5 to 6mm) 1/4" to 1/2" (6 to 12mm) 1/2" to 5/8" (12 to 16mm) The 1/2" to 5/8" Spindle Wrench is newly designed...

ANGLE BLOCKS FOR MILLING & GRINDING 12pcs angle blocks set accurate angles quickly.   Precision ground & hardened steel. 1/4" thickness x 3" length. HARDNESS: HRC56 TO 60 Includes: 1/4" - 1/2" Degree 1-2-3-4-5-10-15-20-25 & 30...

Ballnose Slotdrill Set - Straight Shank (6pc) | 3 to 12mm Our own custom Aprica branded tools. High quality Cutters Made from titanium coated, high speed steel to DIN 327 standard. Sizes included: 3mm, 5mm, 6mm, 8mm, 10mm & 12mm. 2 Fluted, All...

GROUND MILD STEEL STOCK     READY TO BE MACHINED GROUND MILD STEEL BARS    Choose from 25mm or 30mm or grab our 2pc Pack   Each bar is 300mm in length.   Comes supplied in a Hard Plastic Tube

Aprica BSW 1.1/2" x 6TPI Die Nut Made from carbon steel to ISO Standards.   RIGHT HAND THREAD    

Bull Nose Pipe Centres [MT2-MT5] DOUBLE BEARING - 60 DEGREES   IDEAL FOR MATCHING PIPE BETWEEN CENTRES    MT2 - 14 TO 63MM (750 RPM MAX) MT2 - 40 TO 75MM (750 RPM MAX) MT3 - 30 TO 100MM (500 RPM MAX) MT4 - 30 TO...

   Aprica Lathe Machine Attachment - For Concave/Radius Turning upto 50mm   Description: Centre Height is 52 - 52.5 mm (From the base to the cutting height of the insert) which is pre-designed and prefixed for Myford Lathe...