Accessories

T wrench Tap Holder (Guided spindle) NEW DESIGN    Range 3/16 to 3/8" or  5mm to 9.5mm   Specially used in drill press, mill or lathe.  Made from quality steel. Designed to hold taps and reamers.   Jaws are...

2MT APRICA FLOATING TAIL STOCK DIE HOLDER SET   Features interchangeable heads to suit button dies of 13/16", 1" & 1.1/2" OD.   The head floats so the die can move freely when set up for thread die cutting. Ideally used on the lathe...

2MT FLOATING TAIL STOCK DIE HOLDER SET   Features interchangeable heads to suit Australian Standard OD" button dies of 13/16-1", 1.1/2" & 2".   The head floats so the die can move freely when set up for thread die cutting. Ideally...

3MT FLOATING TAIL STOCK DIE HOLDER SET   Features interchangeable heads to suit button dies of 13/16, 1" & 1.1/2". The head floats so the die can move freely when set up for thread die cutting. Ideally used on the lathe for multiple thread...

3MT FLOATING TAIL STOCK DIE HOLDER SET MORE SUITABLE FOR STANDARD AUSTRALIAN DIE SIZES  Features interchangeable heads to suit button dies of 13/16-1", 1.1/2 & 2". The head floats so the die can move freely when set up for thread die cutting...

4MT FLOATING TAIL STOCK DIE HOLDER SET MORE SUITABLE FOR AUSTRALIAN STANDARD DIE SIZES  Features interchangeable heads to suit button dies of 13/16-1", 1.1/2" & 2". The head floats so the die can move freely when set up for thread die cutting...

5/32 - 1/2" Tap Wrench Bar Type 3.97mm to 12.7mm   Drop forged bar type tap holder.

1/8" - 1/2" Tap Wrench Bar Type Can take 3-12mm Taps in Metric or 1/8"-1/2" in Imperial    Approx - 280mm in Length Drop forged bar type tap holder Made from quality Cast Steel with Hardened Jaws for increased resistance to...

11pc BA Spanner Set [0-10BA] Made from Stainless Steel LASER CUT - APRICA PRODUCT   Open Ended Double Sided 11 SIZES - 0-10BA   Sizes are clearly etched on each spanner for easy identification. These spanners have been designed based on...

2pc T-Wrench Tap Holders (Guided Spindles)   You get: Holder 1 : Range 1/16 to 1/4" or  1.5mm  to 6.5mm Holder 2: Range 1/4 to 1/2" or  6.5mm  to 13mm   Specially used in drill press, mill or lathe...

5/32 - 3/4" Tap Wrench Bar Type 3.97mm to 19mm   Drop forged bar type tap holder.

A GRADE HEAVY RIGID BUTTON DIE HOLDERS         HEAVY CAST QUALITY FINISH    QUALITY SET SCREWS TO TIGHTEN YOUR DIES It's important to tighten them evenly to ensure proper alignment and secure fixation of the...