Tips / Inserts

TITANIUM COATED CARBIDE INSERT  x10 VALUE PACK Pitch circle diameter is 1/4" . This is a positive rake insert. Insert measures from point to point about 12.20mm hole size 2.10mm there 3.30mm thick, This insert is a finishing tip to suit our...

5/8" x 20TPI CARBON STEEL INTERMEDIATE TAP  SUITABLE FOR MILD STEELS    60 THREAD ANGLE  COMMONLY USED ON MOTOR CYCLE THREADS

TiALN Inserts - [CCMT-060204]  Carbide inserts to suit our Lathe Turning Tools and Boring Bars     Aprica Carbide Inserts Made in Taiwan - High Grade Titanium Nitride (85RC)   Smaller Boring Bars: 8, 10 & 12MM Shank - CLICK...

TCMT 16T304 & 308 TIAlN Inserts Aprica Carbide Inserts Made in Taiwan - High Grade Titanium Nitride (85RC)     Available in Standard .4 Radius as well as Larger .8 Radius Buy Singularly, in 4 Packs or our 10 Pack Saver...

    TCMT 204 TIAlN Inserts   Aprica Carbide Inserts Made in Taiwan - High Grade Titanium Nitride (85RC)     Available in Standard .4 Radius   Buy Singularly, in 4 Packs or our 10 Pack Saver...

TCMT-520 Titanium Coated Inserts - Suit Micro Boring Bars Inserts can be purchased separately or via 10 Pack Savers    

CCMT-090304 TiAIN CARBIDE INSERTS TiAIN COATED (UPTO 80RC) INSERTS FOR OUR BORING BAR RANGE   These are of a special grade and are coated with Titanium. After this it undergoes a special treatment to reduce the roughness on the coating...

ER11 Thread Cutting Inserts   External carbide inserts are cutting tools that are designed to be mounted on the exterior or outer surface of a cutting tool holder or shank. They are commonly used in machining operations to perform external...

ER16 Thread Cutting Inserts   External carbide inserts are cutting tools that are designed to be mounted on the exterior or outer surface of a cutting tool holder or shank. They are commonly used in machining operations to perform external...

25MM INTERNAL & EXTERNAL LATHE TOOL HOLDERS THESE BARS TAKE ER22 & NR22 CARBIDE INSERTS      25MM EXTERNAL BAR - 150MM 25MM INTERNAL BAR - 200MM      Our Inserts: 22ER - N60 For External 22NR - N60 For...

Titanium Aluminium Nitride Insert for Parting Off Blades GTN - 2, 3 or 4mm Thickness, select your choice.     What is TiAlN (Black) – Titanium Aluminium Nitride? This coating has a greater hardness than TiN. A very thin film of...

 TPG-322 C5 Titanium Coated Milling Inserts  Special grade and coated with Titanium. After this it undergoes a special treatment to reduce the roughness on the coating. These insert are used on our 50MM, 63MM & 80MM Milling/Face...