NEW ARRIVALS

30DEG Pressure Angle Involute Spline Gauge   Made from Stainless Steel - Made for us     15 common sizes PG-S1-GC  Comes supplied on key ring Each gauge is clearly marked for easy identification Extremely hard to...

30DEG Pressure Angle Involute Spline Gauge   Made from Stainless Steel & Made in the USA     15 common sizes PG-S1-GC  Comes supplied in leather pouch Each gauge is clearly marked for easy identification Extremely hard to...

Precision Straight Edges [500mm - 5000mm]  Choose your length    Made from Magnesium Alloy   Comes in standard protected packing WOODEN  box supplied     Precision scrapped within 8 Microns...

T-Type Parting Tool - 1/2" Shank [10mm Centre Height] Complete with 1x 3/32" x 5/8" x 5" HSS Blade    85mm Length body  Suits low Centre height machines.  From bottom of Tool to tip is 10mm or 3/8" Suits small Chinese...

T-Type Parting Tool - 10mm Shank [12mm Centre Height] Complete with 1x 3/32" x 1/2" x 4" HSS Blade    55mm Length body  Suits low Centre height machines.  From bottom of Tool to tip is 12mm or 1/2" Suits small Chinese Machines,...

T-Type Parting Tool - 12mm Shank [12mm Centre Height] Complete with 1x 3/32" x 1/2" x 4" HSS Blade    55mm Length body  Suits low Centre height machines.  From bottom of Tool to tip is 12mm or 1/2" Suits small Chinese Machines,...

T-Type Parting Tool - 12mm Shank [12mm Centre Height] Complete with 1x 3/32" x 5/8" x 5" HSS Blade    55mm Length body  Suits low Centre height machines.  From bottom of Tool to tip is 12mm or 1/2" Suits small Chinese Machines,...

T-Type Parting Tool - 16mm Shank [20mm Centre Height] Complete with 1x 1/8" x 3/4" x 6" HSS Blade    55mm Length body  Suits low Centre height machines.  From bottom of Tool to tip is 20mm or 3/4" Suits small Chinese Machines,...

5pc QUICK CHANGE TOOL POST SYSTEM   T3 MODEL   WILL THIS FIT MY LATHE? The easiest wat is to measure your 4 way Tool post block from the top to bottom. If the height is within 10mm either side of 95mm (This Blocks height) then...

QUICK CHANGE TOOL POST SYSTEM 37MM MODEL Will suit -  MYFORD, SOUTHBEND, HERCUS & smaller lathes up to 24" 600MM between centre block height.    Includes main Block & 3 Holders for lathe tools as well as 1 Extra holder with a...

QUICK CHANGE TOOLPOST SYSTEM -  Medium 51MM Main holder is 51mm high & 16mm bore in middle which can be altered to suit your machine either by bush or opening spigot bore.   Includes: Tool Post Block T51 (51mm High) which will suit...

Taper Drill & Ream all in one - Cobalt HSS Pin Reamers [50-1] Ratio [6.25mm-16mm Range]        APRICA BRANDED     Spiral fluted ANSI Standard round straight shank METRIC 50-1 COMMON SIZES Made from...