Lathe Tooling

T-Type Parting Tool - 1/2" Shank [10mm Centre Height] Complete with 1x 3/32" x 5/8" x 5" HSS Blade    85mm Length body  Suits low Centre height machines.  From bottom of Tool to tip is 10mm or 3/8" Suits small Chinese...

T-Type Parting Tool - 10mm Shank [12mm Centre Height] Complete with 1x 3/32" x 1/2" x 4" HSS Blade    55mm Length body  Suits low Centre height machines.  From bottom of Tool to tip is 12mm or 1/2" Suits small Chinese Machines,...

T-Type Parting Tool - 12mm Shank [12mm Centre Height] Complete with 1x 3/32" x 1/2" x 4" HSS Blade    55mm Length body  Suits low Centre height machines.  From bottom of Tool to tip is 12mm or 1/2" Suits small Chinese Machines,...

T-Type Parting Tool - 12mm Shank [12mm Centre Height] Complete with 1x 3/32" x 5/8" x 5" HSS Blade    55mm Length body  Suits low Centre height machines.  From bottom of Tool to tip is 12mm or 1/2" Suits small Chinese Machines,...

T-Type Parting Tool - 16mm Shank [20mm Centre Height] Complete with 1x 1/8" x 3/4" x 6" HSS Blade    55mm Length body  Suits low Centre height machines.  From bottom of Tool to tip is 20mm or 3/4" Suits small Chinese Machines,...

QUICK CHANGE TOOL POST SYSTEM SPARE HOLDERS PLEASE NOTE THIS IS A BASIC STARTER SYSTEM. YOU CAN BUY MORE HOLDERS TO SUIT THIS SYSTEM TO EXPAND YOUR RANGE.   Suits lathes up from 36" to 48" between centers. HOLDERS: 95x40x50mm HIGH The main...

5pc QUICK CHANGE TOOL POST SYSTEM   T2 MODEL PACKED WEIGHT IS 12KG - SENT VIA AUSTRALIA POST W/ SIGNATURE   WILL THIS FIT MY LATHE? The easiest wat is to measure your 4 way Tool post block from the top to bottom. If the height...

5pc QUICK CHANGE TOOL POST SYSTEM   T3 MODEL   WILL THIS FIT MY LATHE? The easiest wat is to measure your 4 way Tool post block from the top to bottom. If the height is within 10mm either side of 95mm (This Blocks height) then...

QUICK CHANGE TOOL POST SYSTEM 37MM MODEL Will suit -  MYFORD, SOUTHBEND, HERCUS & smaller lathes up to 24" 600MM between centre block height.    Centre spigot hole: 1/2" CAN BE BUSHED OR OPENED UP TO SUIT YOUR EXISTING...

QUICK CHANGE TOOLPOST SYSTEM -  Medium 51MM Main holder is 51mm high & 16mm bore in middle which can be altered to suit your machine either by bush or opening spigot bore.   Includes: Tool Post Block T51 (51mm High) which will suit...

T63 QUICK CHANGE TOOL POST SYSTEM Will this fit my Lathe? Simply measure your height of your tool post block only. This System is 63mm in height if your is within 8mm it should fit.   Suit lathes up from 36 to 48" between centers...

Quick Change Tail Stock Turret (Quad Head) Available in either a 2MT or 3MT Arbor select your option up the top.   (If a 4MT is required grab a drill sleeve which will transform the Turret into a 4MT tailstock)     What this unit...