Solid Carbide Tipped Lathe Tool | 3/8" - Left & Right Hand
- Shipping:
- Calculated at Checkout
$13.95
Description
Solid End - M20 Grade Cemented Carbide.
Suits general steel and stainless steel.
These can be resharpened , ideal for roughing out and welded parts , if tool chips just regrind them with a Silicon carbide Green wheel and use a Diamond File to Clean up we do sell Diamond files for this job check out our variations there at the end
Related Products
Solid Carbide Tipped Lathe Tool | 1/2" - Left & Right Hand
$17.95
Solid End - M20 Grade Cemented Carbide.
1/2" Left hand, right hand & combo's available.
Lathe Insert Holders (Complete with Insert) Left or Right Aprica 10-16mm Shanks
$34.95
Aprica LPR Toolmakers Range of Insert Turning Toolholders for lathes
TAKES TCMT-204 ISO STANDARD INSERTS
Sizes
1/4" Lathe Turning Tool Holder (Includes 1/4" HSS Tool Bit)
$42.95 - $124.95
1/4" LATHE TURNING TOOL HOLDERS
EACH HOLDER COMES SUPPLIED WITH ALLEN KEY & 1/4" X 3" HSS TOOL STEEL
![Lathe Tool Holder Long Series (Double Ended - Sizes 10 to 20mm) [Right Hand + Centre Cut]](https://cdn11.bigcommerce.com/s-c9l4hm6h/images/stencil/590x590/products/4365/13499/Double_Ended_w_Centre_Cut_Toolholder_Long_Series_Range__97228.1684292338.jpg?c=2 "Lathe Tool Holder Long Series (Double Ended - Sizes 10 to 20mm) [Right Hand + Centre Cut]")
![Lathe Tool Holder Long Series (Double Ended - Sizes 10 to 20mm) [Right Hand + Centre Cut]](https://cdn11.bigcommerce.com/s-c9l4hm6h/images/stencil/590x590/products/4365/13495/Double_Ended_w_Centre_Cut_Toolholder_Long_Series_-_20mm__32455.1684292332.jpg?c=2 "Lathe Tool Holder Long Series (Double Ended - Sizes 10 to 20mm) [Right Hand + Centre Cut]")
Lathe Tool Holder Long Series (Double Ended - Sizes 10 to 20mm) [Right Hand + Centre Cut]
$59.95 - $96.95
LONG SERIES - Double Ended Insert Tool Holders - Right & Centre Cut
10mm x 70mm long (Takes TPMT-2
3/8" Lathe Turning Tool Holder (Includes 3/8" HSS Tool Bit)
MSRP:
$53.95
$46.95
3/8" LATHE TURNING TOOL HOLDER
Tool Holder Size: