Aprica Branded Metric & Imperial HSS Reduced Shank Drills 

All drills have 1/2" shank

                          We stock metric and imperial drills, choose the size you need above.

Metric Sizes: 14mm, 15mm, 16mm, 17mm, 17.5mm, 18mm, 19mm, 20mm, 21mm 22mm, 24mm, 25mm, 26mm, 30mm

Imperial Sizes: 5/8", 3/4", 1.1/8"

Cutting Length: 150mm to 80mm

We have here industrial grade M2 HSS reduced shank drills, these are ideally used when drilling larger holes in steel and alloy when morse taper drills are not available or your machinery does not
have a Morse Taper Spindle.  The following drills are listed as a variation; please click on size required. 

PLEASE NOTE! When using reduced shank drills or any type of drill for that matter it is normal practice to open up hole step my step , for example if wanting to drill a 25mm Hole is steel plate I would use a 6mm drill open up with 10mm then 16mm and then 25mm reduce drill speed as you get larger, and always clamp vice or metal plate securely .