Carbon Steel Tap & Dies

UNC 3pc Tap Sets CARBON STEEL [1/4"-1"] RIGHT HAND THREAD INC A TAPER, INTER & PLUG TAP EACH SET   *Please Note carbon Steel Taps & Dies are not recommended for Stainless Steel and other High Tensile Steels, we recommend HSS...

6-24NF to 12/24NC Machine Screw Tap & Die Set Very hard to source a rare tap & die set complete like this !  These are small UNF & UNC American screw thread taps and dies that you normally only see in books, but they are extensively...

NC/NF Machine Screw Tap & Die Set [33pc]  MADE FROM HSS - 22 Taps & 11 Button Dies   Features all the hard to find smaller machine screw sizes: 0-80NF to 5-44NF   11 Tap & Die sizes included in this kit - Save huge $$ then...

   Special Threaded UNEF Intermediate Tap  1/2" x 24TPI - Suits Indian Motorbikes  Unified Extra Fine (UNEF) 1 Piece Right Hand Thread - High Speed Steel       d1 - Minor thread diameter male d2...

APRICA UNEF/UNS HSS TAP AND BUTTON DIE COMBO'S We stock 10 different SIZES. 3PC TAP SET PLUS MATCHING BUTTON DIE IN THIS LISTING SAVE $$$ 60 DEG 5/32 X 40 TPI 3/16 X 40 TPI 7/32 X 40 TPI 1/4 X 40 TPI 1/4 X 32 TPI 9/32 X 32 TPI 5/16 X 40...

Boxed UNF Tap & Die Set [1/4" - 3/4"] Carbon Steel 32 Piece Set - 21 Taps & 7 Dies including matching tap & die handles.   All Taps & Dies are made to ISO Standards.  Suitable for Mild Steels if wishing to use on harder...

APRICA BRANDED ISO STANDARD CARBON STEEL UNF THREAD    EACH TAP SIZE HAS 3 LEADS: TAPER, INTERMEDIATE & PLUG   Thread / Size chart:  SIZE         TPI ...

Boxed UNF Tap & Die Set [1/4"-1"] - Carbon Steel 42 Piece Set - 27 Taps & 9 Dies including matching tap & die handles   This is a pre-made set sold as is and can't be modified or customised. We also sell other UNF kits so please see...

Aprica Brand Left Hand UNF/SAE Dies [1/4"-1"]  Made from quality carbon steel to ISO standard   All dies are round and split We stock Tap and Die Holders to suit please see links below the table.   Size (inch)TPIDie OD...

APRICA BRANDED ISO STANDARD CARBON STEEL UNF STANDARD THREAD   ALL DIES ARE ROUND AND SPLIT   LPR TOOLMAKERS  UNF DIES  SIZE         TPI  O/D...

UNF Tap & Die Bundle - 40pc from 1/4" to 1" Each tap set comes with all 3 leads - taper, intermediate & plug threads. Includes matching split button die for each size. All taps & dies are made to DiN standards, ground threads and leads...

20PC UNF TAP & DIE SET - CARBON STEEL 1/4" TO 1/2" SIZES     THIS KIT INCLUDES: 1/4 x28 tpi    5/16x24 tpi   3/8x24tpi      7/16x20tpi    1/2x20tpi   1/4", 5/16" &...