Brass Drip Feed Oilers - BSP threaded from 20ML to 500ML

Drip feed Oilers

  These oilers have a shut off and needle valve for oil feed adjustments.

The sight glass is provided so that the operator can adjust the feed to proper volume.

This type of oiler is especially adopted where regulation of the oil feed is required.
These oilers are recommended where supply of oil under visible control is required.

 Thread:

All our oilers are BSP Threaded (But we do have BSP to NPT switch connectors to suit each oiler please contact us if required)

 The bodies are fully machined cast brass and are made from original dimensions.

Oil Cups are made from brass and glass for full view, all parts are machined. 

Drip feed oilers are single point lubricators that are mounted directly onto the lubrication points. These oilers dispense oil by gravity from a transparent reservoir through a needle valve. The needle valve is joined with a toggle pin by which the operator can turn the flow off or on manually.

The flow of the oil is controlled by adjusting the needle valve and can be visualized from the in built sight glass. These oilers are available in 3 different BSP Thread Sizes.