8pc HSS Profile Cutter Set - In Pouch 1/4"

MADE FROM GROUND STEEL

       Each Set includes:

1. Right Hand Turning Tool: This cutting tool is used for turning the outside diameter of a workpiece in a clockwise direction. It has a cutting edge that is ground to an angle that is suitable for taking light to medium cuts on a variety of materials.

2. Left Hand Turning Tool: Similar to the right-hand turning tool, the left-hand turning tool is used for turning the outside diameter of a workpiece but in a counter clockwise direction. It is designed for use on materials that have a tendency to work-harden or produce long chips.

3. Straight Cut Turning Tool: This tool is used for facing, turning, or profiling operations on a workpiece. It has a square or rectangular cross-section, with a cutting edge that is perpendicular to the tool's shank.

4. Corner Right Angle Tool: This cutting tool is used for squaring off the corners of a workpiece or making cuts at right angles. It has a cutting edge that is ground to a 90-degree angle.

5. Boring Bar: This tool is used for creating a hole that is accurately sized and has a good surface finish. It is designed to be inserted into an existing hole and rotated to remove material and enlarge the hole.

6. Internal Boring Bar Blind Holes: Similar to a boring bar, an internal boring bar for blind holes is designed for creating holes that are not through-holes. It has a cutting edge that is angled to allow it to remove material from the bottom of the hole.

7. Grooving Tool: This tool is used for creating narrow grooves or slots in a workpiece. It has a cutting edge that is ground to a specific width, allowing it to create grooves of various sizes.

8. 60-Degree Thread Cutting Tool: This cutting tool is used for creating 55 to 60-degree threads on a workpiece. It has a cutting edge that is ground to a specific angle and is designed to cut into the material as the tool is rotated.

 These Cutters are professionally ground on a profile Tool & Cutter Grinder
8 different profiles made from high quality
High speed steel , also suited in Holders or straight in your Tool post