Description
Nu-Thread PipeFile for Hydraulic Fittings
File # 8-10-11.1/2-14 tpi
8.3/8” long 1” WIDE ½” THICK
Made in the USA
4 pitches on this 1" wide pipe file: 8, 10, 11-1/2 & 14 tpi. Nu-Thred® files are the highest quality with cross-cut and depth proportional to the thread pitch,
so file will not skip or jump out of fine pitches.
Nu-Thred® files are the highest quality with cross-cut and depth proportional to the thread pitch, so file will not skip or jump out of fine pitches. Our files are milled , not cold-formed, so our cutting teeth actually have sharp edges which allow the file to do the work rather than the mechanic. Our file teeth also come to a sharp point which allows the teeth to get to the bottom of the thread and remove any rust or gunk that has accumulated there. Nu-Thred® files have been made to this high standard since 1947 in Reading, Pennsylvania, and will renew damaged external threads of any diameter (right or left-hand). |
RESTORES THREAD PITCHES ABOVE
REPAIRS DAMAGED THREADS ON WHEEL HUBS AND OTHER AREA’S WHERE THREADS GET DAMAGED