null

Workshop visits welcome, by appointment only. Please phone to arrange a visit time.

Fly Cutter Carbide Insert Type - 50 to 100mm Heads - Pick your preferred size

SKU:
FLY50-3MT
Availability:
If in stock (Please see below price for current stock level) - Ships same day if ordered between Monday-Friday & before 3.30PM Victorian time.
Shipping:
Calculated at Checkout
  • Fly Cutter Carbide Insert Type - 50 to 100mm Heads - Pick your preferred size
  • Fly Cutter Carbide Insert Type - 50 to 100mm Heads - Pick your preferred size
  • Fly Cutter Carbide Insert Type - 50 to 100mm Heads - Pick your preferred size
  • Fly Cutter Carbide Insert Type - 50 to 100mm Heads - Pick your preferred size
  • buy fly cutter australia
  • Fly Cutter Carbide Insert Type - 50 to 100mm Heads - Pick your preferred size
  • hss fly cutting large OD
  • fly cutting cnc machine
  • measuring fly cutting
  • Fly Cutter Carbide Insert Type - 50 to 100mm Heads - Pick your preferred size
  • Fly Cutter Carbide Insert Type - 50 to 100mm Heads - Pick your preferred size
  • Fly Cutter Carbide Insert Type - 50 to 100mm Heads - Pick your preferred size
$139.95

Description

Aprica Fly Cutters with 1/2" Shank Carbide Insert Lathe Tool   

CNC Machined from solid steel
  
  • Each Unit Comes complete with 1 x 12mm Carbide Tipped Lathe Tool to suit.
 
Our newly designed Fly Cutters come in either 50, 75 or 100mm OD heads you can choose from the following options:
 
50mm Head with 3MT x 12mm x 1.75 Drawbar Arbor 

75mm Head with 3MT x 12mm x 1.75 Drawbar Arbor 

100mm Head with 3/4" Straight Shank Arbor 

100mm Head with R8 Shank Arbor 

 

 
The 50 & 75mm fly cutters are made to fit into your Milling Machine whilst the 3/4" Straight shank is perfect for your collet chuck or sidelock holder.
 
Using the right tools ,you can fly cut up to above 250mm and beyond.
This cutter is ideal for Machining Alloy Heads. No issue with other machinable materials
 
 
We've had this tool designed exclusively for our customers to enhance your flexibility when Fly Cutting. This is a great little unit! 
 
These units take TNMG-404 or TNGM-408 Inserts which you can buy spares for also in this listing.
 
 

FOR BEGINNERS:

  1. Install the carbide lathe tool into the Fly Cutter, making sure that it is held firmly in place. Use a wrench to tighten the set screws and ensure that the tool is secure.

  2. Adjust the depth of cut: Adjust the depth of cut on the Fly Cutter so that the carbide lathe tool is just touching the surface of the material you are cutting. Be sure to take small cuts, as carbide is much harder than HSS and can easily break if you try to take too much material off at once.

  3. Start the machine: Turn on the milling machine and slowly move the Fly Cutter across the surface of the material you are cutting. Be sure to use a circular motion, and take your time.

  4. Check the surface: Periodically stop the machine and check the surface of the material for smoothness and flatness. Adjust the depth of cut as necessary, and continue until you have achieved the desired finish.

  5. Clean up: When you have finished cutting, turn off the machine and clean up the work area. Remove the Fly Cutter and carbide lathe tool, and store them in a safe place.

By following these steps, you should be able to use a Fly Cutter (100m Head - 3/4" Straight Shank) 1/2" Slot with a carbide lathe tool to achieve a smooth and precise finish on your workpiece

 

View AllClose

Additional Information

Shank Size:
3/4"
Head OD:
100mm
Tooling Size:
1/2"
View AllClose

Related Products

//]]>